• We report a new electrochemical biosensor

  2018-11-01

  

  We report a new electrochemical biosensor for CRP detection as part of a first step in the development of simple, multi-electrode microfluidic clinical diagnostic tools. One of the biggest challenges with multi-analyte electrochemical biosensors is localization of the affinity agents on individual e

• SCR 7 In the present study in vivo leptin treatment induced

  2018-11-01

  

  In the present study, in vivo leptin treatment induced the phosphorylation of STAT3 in neurons and astrocytes but not in microglia, whereas it did not affect inflammation induced by TNFα in hypothalamic cultures (Pan et al., 2008; Wang et al., 2015). Consistent with our findings, it is demonstrated

• Workflow Mascot Distiller Mascot IRMa hEIDI Spectral

  2018-11-01

  

  Workflow 3: Mascot Distiller/Mascot/IRMa-hEIDI/Spectral Counting. Data were processed automatically using Mascot Distiller software (version 2.4.3.0, Matrix Science). ESI-TRAP was chosen as the instrument, trypsin/P as the enzyme and 2 missed cleavages were allowed. Precursor and fragment mass error

• purchase Lomustine Table shows the primers used for the ampl

  2018-11-01

  

  Table 1 shows the primers used for the amplification of the analyzed genes, according to the used methodology. Fig. 1 presents the results of PDHA1 and PDHA2 gene expression in somatic purchase Lomustine of the individuals under study and in controls. Fig. 2 displays the alignment of PDHA1 and PDHA

• br Experimental design materials and methods br Acknowledgme

  2018-11-01

  

  Experimental design, materials and methods Acknowledgments This work was supported by Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq 44371/2014-0), Fundação Carlos Chagas Filho de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ E26/110.271/2014) and Programa Estratég

• The profile pattern irregular as can be

  2018-11-01

  

  The profile pattern irregular as can be seen from the graph of Fig. 3 that summarizes a period of measurement (14–17 October 2013) The total installed power to complete the various processing phases is equal to 127kW. The mean monitored power during actual working conditions is around 30kW. The pea

• Mitiglinide Calcium Traditionally in the absence of an

  2018-11-01

  

  Traditionally, in the absence of an external gold standard, research on social measurement has considered measurement approaches yielding higher prevalence figures for the risk behavior to be more valid. However, recent randomized experiments for e.g., Brener et al. (2006) suggest that this approach

• The current results are consistent with the animal models

  2018-11-01

  

  The current results are consistent with the animal models of cannabinoid exposure during adolescence (Rubino et al., 2008; Schramm-Sapyta et al., 2007) and suggest that more human research is needed on the long-term effects of cannabis use in adolescence. In consideration of the animal studies and t

• A similar perceptual tuning process

  2018-11-01

  

  A similar perceptual-tuning process may also occur in the auditory domain. Despite being pre-linguistic, infants are able to respond selectively to emotional content in voices from an early age (Grossmann et al., 2010), and recognize identity based on vocal characteristics. However, these biases are

• Higher aerobic fitness predicted greater CBF in the hippocam

  2018-11-01

  

  Higher aerobic fitness predicted greater CBF in the hippocampus (β=0.235, t=2.085, p=0.041) when controlling for age, sex, and average hippocampal volume (Fig. 2). In particular, higher aerobic fitness predicted greater CBF in the posterior hippocampus (β=0.241, t=2.163, p=0.034), when controlling f

• kisspeptin br Results and discussion br Conclusions The

  2018-11-01

  

  Results and discussion Conclusions The electronic structures, elastic properties and thermodynamics of MgZn2, Mg2Y and Mg2La were determined from first-principles calculation. The calculated heats of formation and cohesive energies show that Mg2La has the strongest alloying ability and structu

• In order to employ the wave attenuation method

  2018-11-01

  

  In order to employ the wave-attenuation method in the numerical work, a periodic pressure oscillation signal which frequency equals to the first acoustic mode (−177 Hz) is superimposed on a steady flow at the head end of the chamber via UDF (user defined function) for 0–0.3 s, and then the pressure

• However the use of friction surfacing

  2018-11-01

  

  However, the use of friction surfacing process for many applications has been limited due to the difficulty of monitoring and control of the process outputs, such as bond quality and coating dimensions [4]. Proper selection of process parameters is vital for obtaining the quality coatings using fric

• Based on the literature studies it

  2018-11-01

  

  Based on the literature studies, it ACA was found that mechanical properties of kenaf–aramid hybrid composites were not reported. The present study aimed to evaluate the mechanical performance of kenaf–aramid hybrid composites for spall-liner application. Since the properties of a composite are oft

• The three explosive materials were modelled using

  2018-11-01

  

  The three explosive materials were modelled using JWL (Jones, Wilkins and Lee) equations of state; the parameters applied are listed in Table 3. Fig. 3 shows the GRIM modelling predictions of the two designs in both modes; the external groove or “Helical” design and the plastic insert and groove co

15574 records 1027/1039 page Previous Next First page 上5页 10261027102810291030 下5页 Last page